www.recumbents.com
www.recumbents.com
www.recumbents.com
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 www.recumbents.com
 Technical / Bike Building
 Lunatic Fringe 3.0 Streetliner

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
Videos: Google videoYoutubeFlash movie Quicktime movieWindows Media videoReal Video
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

 
   

T O P I C    R E V I E W
LunaticFringe Posted - 11/18/2017 : 17:05:11
WOW! I've been out of the game for a while. It's time to jump back in.

I had gotten up to 299.9 pounds, which scared me, and now I'm down to 230. By May, I'll hopefully be around 199.9. A 100 pound loss would be cool! I'm riding fast again and feeling GREAT. In the past few years, my town, Tucson, AZ, has built an amazing system of bike-friendly trails with no cars around (about 100 miles worth) and this streetliner will be a blast to cruise on it. I will also attend a few velodrome races with you guys, hopefully in 2018. Wahoo!


---

I weighed about 280 pounds when I was riding 2.0. It was so fast that I allowed it to trick me into thinking that I was still fit at that weight. Hah!



---

This project will start off with the same bike that I had used for 2.0, pictured below. It is the Steintrikes Speedster FS. The full suspension makes it a dream to ride on rough roads and it was really fast with the old fairing on it. The old fairing was HUGE. The new one will be much lighter and easier to transport. It has the Schlumpf High Speed Drive for the higher gearing needed for a streamlined bike.









---

This new fairing will be constructed of a mix of an existing fiberglass fairing and fabric-over-rib construction, similar to Rick Gritters' awesome ride. I will be learning from the DVD available from GA Boats. It shows every step about how to build fabric-over-rib boats, like an 8 pound canoe. http://www.gaboats.com/


---

The nose fairing arrives soon (pictured below, on a trike). I got it on eBay at a delivered price approx. $123. Made by Midnor Mold. It seems to be a decent shape to start with and I can easily modify it to suit my needs. https://www.ebay.com/itm/Recumbent-Bicycle-Nose-Cone-Recumbent-Fairing-Recumbent-Nose-/263269950942



---

I set up my work area today so that I can begin the process. This won't be a mad rush and I'll start by making a stand for the bike so that it sits on top of the work table. I figure that I'll be done in a couple of easy months' work this winter.





---

I no longer use a factory for my business activities. I only sell my product designs online using about 35 websites. I mostly sell traffic related security products and fake rock waterfalls for swimming pools. I'll be building this streetliner at a house where I operate the business from. I have still messed around with fiberglass over the years and recently made a ram air system for the Harley that WORKS GREAT.





---

There won't be a techinical, dimensioned drawing for this build... I'm just going to wing-it and post pics along the way. It seems that the fabric-over-rib construction will be affordable and light. Since I'll be a newbie at that type of construction, I won't lock myself into a technical drawing.

I'll post more pics as it develops over the next couple of months. Next post might be in a week or two.

Jeff Bales
Tucson, AZ
Lunatic Fringe 3.0
25   L A T E S T    R E P L I E S    (Newest First)
LunaticFringe Posted - 02/20/2018 : 20:17:49
I found a new fabric that is pre-colored with no UV issues. I have sent an email to them to see if I can shrink at a lower temperature, just like I can with Dacron.

Very cool!

https://www.youtube.com/watch?time_continue=35&v=GJ-KHRHlRDg

http://betteraircraftfabric.com/

Jeff
Jerry Posted - 02/20/2018 : 17:45:39
quote:
Originally posted by LunaticFringe

quote:
Originally posted by Jerry

Wait 12 more years and see if you still have it! LOL. Hell, I don't know what "it" is anymore. Just kidding!

It would be the perfect marriage if the wife loved building HPV's, racing, and making sure her man always had cold beer! Good luck with your marriage and new build Jeff.



Hah! I'm off to a good start with her. She has embraced my way of eating and lost a few pounds herself, drinks vodka sodas with me, and loves going on Harley rides with me (she was terrified of motorcycles when she first met me). We haven't even had an argument yet... uh oh. ;)

Jeff



Just keep saying yes and you will not have arguments! The wife told me last night to carry out the trash. I told her no way, not until I get the dishes washed and laundry put away. Ha
LunaticFringe Posted - 02/20/2018 : 15:52:42
Taylor, from Velocity Velos, came through with a quick delivery of the new Flevo roof. Thanks, Taylor!

https://www.velocityvelos.com/products/flevo-roof

Talk about a lucky perfect fit! All I did was put it together and set it onto the bike. I'll install the metal post mounts a few inches closer together, at the dashboard bends, so that the windscreen takes on a bit of curved shape (more strength). That prevents it from bending downward while riding.

What a cool fit, right out of the box!!! I must be living life the right way.



---



---



---



---



---



Jeff 'the Sky is no longer the limit' Bales
LunaticFringe Posted - 02/20/2018 : 13:45:27
quote:
Originally posted by Jerry

Wait 12 more years and see if you still have it! LOL. Hell, I don't know what "it" is anymore. Just kidding!

It would be the perfect marriage if the wife loved building HPV's, racing, and making sure her man always had cold beer! Good luck with your marriage and new build Jeff.



Hah! I'm off to a good start with her. She has embraced my way of eating and lost a few pounds herself, drinks vodka sodas with me, and loves going on Harley rides with me (she was terrified of motorcycles when she first met me). We haven't even had an argument yet... uh oh. ;)

Jeff
Jerry Posted - 02/20/2018 : 12:34:10
Wait 12 more years and see if you still have it! LOL. Hell, I don't know what "it" is anymore. Just kidding!

It would be the perfect marriage if the wife loved building HPV's, racing, and making sure her man always had cold beer! Good luck with your marriage and new build Jeff.
LunaticFringe Posted - 02/19/2018 : 23:21:34
Thanks, guys! Itís the first time that Iíve ever been married with a marriage license and all that jazz. At the ripe old age of 53, Iíve still got it.

;)

Jeff
warren Posted - 02/19/2018 : 19:08:12
Comgratulations, Jeff!
Jerry Posted - 02/19/2018 : 18:40:16
Oh yeah baby, blame it on the weather! LOL!

And by the way, congratulation!
LunaticFringe Posted - 02/19/2018 : 18:11:40
Well, since my last post, I ran off to Vegas to get married. Hah!

We got married in one of the cabins on the High Roller ferris wheel.
Meet Mrs. Amber Bales...



It's been cold and rainy, so work on the streetliner is sparse.

The head fairing is now attached to its base.

The outward facing surfaces of the spars are sanded and ready for a thin coat o' Bondo.

It will be cold the next few days, so sparse posts again.



---



This is just a silly time-lapse of me getting it done today...

https://www.youtube.com/watch?v=olbjU9IWOkg

Jeff
LunaticFringe Posted - 02/13/2018 : 15:02:15
Except for the construction of the connection between the trailer and the streetliner's fairing, LunaticTrailer is now road worthy.



---



---



The trailer, right at home. Oy, no more trailers!



Not bad for a total $860 expense with licensing, paint, and wheel covers.

Jeff
Jerry Posted - 02/12/2018 : 17:46:47
Thom, my body is tiny now. I am down below 185 pounds. I haven't been this size since 1970 when I graduated high school. Not to worry, my old noggin is still the same size.

I like the color of that fender Jeff.
LunaticFringe Posted - 02/12/2018 : 14:32:47
Edit: For some reason, the forum's program repeated a post from above in this box. I removed it.

Jeff
LunaticFringe Posted - 02/12/2018 : 13:46:56
Hah! 'Love this group o' guys.

It's a Blue Monday over here. I got to paint the fender last night, thinking that the whole enchilada would be done. I got delayed by a fellow that stopped by to buy an old truck that I had in the front yard.

Today it is way too windy to paint, even with Jerry's huge noggin leading the way. It's all sanded and ready to spray. Ah well, I'll just redo the lights and wiring this afternoon instead of tomorrow.



Jeff
Speedbiker Posted - 02/12/2018 : 11:36:15
Jerry, are you sure it's not your tiny body?
Jerry Posted - 02/12/2018 : 07:44:59
Starting to look like a liner Jeff. Looking forward to seeing the speed and handling results. In cross winds I just lean my big old nogging into the wind. It is big enough to act like a keel! My nogging that is!
Garrie L Hill Posted - 02/11/2018 : 17:24:11
OK, now that makes sense. Somehow I had a picture in my mind of a ramp with little Hobbit feet at the end ;-)

Garrie "carbon based lifeform" Hill
HPRA Co-Dictator of the East
for pics of some of my time and money sucking projects
http://s58.photobucket.com/albums/g277/cfbb/
and videos
http://vimeo.com/5513519


LunaticFringe Posted - 02/11/2018 : 12:43:19
Garrie, this shows the trailer with the center ramp for motorcycle tire use and the foot ramps to the sides (helps to keep feet down as you maneuver the motorcycle onto the platform). =)



This pic shows that I don't need to modify the mount for the spare tire, instead, I'll make a simple fiberglass mount that engages the front of the fairing on the streetliner with a hook underneath. That will allow me to place the bike with the fairing nestled into its mount and hook and it will stay upright while I strap it down.



Maybe it is time to add the bike's kickstand... holding it up with chairs is starting to get old. Haaaaaaaaaaaah!

Jeff

PS: Maybe it is time to take my Christmas lights down now. ;)
LunaticFringe Posted - 02/10/2018 : 20:43:24
quote:
Originally posted by Garrie L Hill

Jeff;

ď..... loading ramp with dual feet ramps .... ď . Not sure I follow you...


I am currently out at dinner. I will post a photo for you, probably tomorrow. If you look at the picture I posted, you can see one main rail is bolted on the passenger side of the trailer on the platform. That one is for the tires of the motorcycle. On the driverís side of the platform there are two long metal grates that serve as ramps for feet. I was going to post a picture for you from the Craigslist ad, but he has already taken it down.

Jeff
Garrie L Hill Posted - 02/10/2018 : 20:26:09
Jeff;

ď..... loading ramp with dual feet ramps .... ď . Not sure I follow you, there. Explanation/photos?

Garrie "carbon based lifeform" Hill
HPRA Co-Dictator of the East
for pics of some of my time and money sucking projects
http://s58.photobucket.com/albums/g277/cfbb/
and videos
http://vimeo.com/5513519


LunaticFringe Posted - 02/10/2018 : 18:18:17
LunaticFringe 3.0 Streetliner has a new way to get around!

It took all day to drive up to Phoenix, buy the trailer, license it, then drive back to Tucson, but it was worth it!

For the last month, I've been keeping a look out for a trailer that would be heavy duty enough to carry the Harley, bounce over rough terrain when towing the dual-sport KTM motorcycle, and small/convenient enough to load the streetliner bicycle onto it for regular jaunts to the launching pad at our town's 130 mile long dedicated bicycle path.

I found this one to suit all needs for only $600. Wahoo! It has leaf springs for a suspension, car tires for an easier pull on the highway (instead of those teeny-tiny little tires that are used so often on motorcycle trailers), and a loading ramp with dual feet ramps for balance as the motorcycles are ridden onto the platform. I bombed back to town, hustling with traffic down the highway at 85 mph with no issues, as if the trailer wasn't even there.

This is the trailer that I'll use to bring LunaticFringe 3.0 out to hit a few races with you guys.

I'll make a minor adjustment to the plate that holds the spare tire so that it won't interfere with the streetliner's front fairing, then paint it all, probably a bright satin orange. I have a good, secure place to park the trailer alongside the house in the RV parking area, but this will do for tonight.

It's time to take the fiancee out for some dinner and relax. Aaaaaah.



Jeff
LunaticFringe Posted - 02/09/2018 : 19:53:26
Making 'head way'.

The head fairing is now fiberglassed and sanded. It won't take much to finish the prep and paint. It is really light. I sanded the Bondo while it still had the foam form underneath for rigidity.

I used the figerglass part, that was previously used for a Flevo roof, as a form instead of grafting it into the new fiberglass since I'm using polyester and it is made with epoxy. It worked well.

After sanding the body putty (thin application), I saw that I had sanded through the fiberglass very slightly in about six places. Perfect! I'll add a few dime-sized pieces of fiberglass from the under side tomorrow to seal the holes.

The head fairing that you see being sculpted will actually be attached to a panel that is underneath it, covered in duct tape. It will serve as storage for large bulky things, like a camping sleeping bag, or 1970's disco pants and afro wig.

This shows one layer of 1 1/2 oz fiberglass and polyester over the form:



This shows about 1 pint of Bondo applied over its surface:



About 70 percent of the body putty was sanded off with an orbital sander while the foam form was still inside.



This shows the foam form as a pile of garbage after removal and one of the small holes that I sanded through the fiberglass:



The empty part:



Look at the sunlight shining through there... THIN!



Sanded and lookin' good.



---



---



Jeff
LunaticFringe Posted - 02/08/2018 : 20:26:34
Hah! Thanks, Stix and Jerry!

Today I began to sculpt the head fairing. After I fiberglass it tomorrow, I'll probably adjust the angle of the Flevo roof mounting area. I may also lower the fairing at the rear, but I need to get to a light piece of fiberglass first. I cut some pieces of foam to form the shape and will dial it in. After the fiberglass goes on, the foam structure will be pulled out.

This photo shows how I cut slits in the foam panels to make it easy to curve.



This shows the overall shape after capping the curved box with 3 foam panels, shaped with an electric belt sander. ;)



The holes that you see in the foam are from the cyanoacrylate glue. I don't fret over the melting. It's just used as support for fiberglass... and it sets up fast.



This shows the foam shape sealed with white acrylic paint, then coated with green PVA release. I wanted to knock this out today and fiberglass it, too, but it would have rushed things too much. It's dry now and will be ready in the morning.



That's it for tonight... 'time to hit the Horseshoe Grill down the street and get some smoked wings!

Jeff
Jerry Posted - 02/08/2018 : 16:57:04
And here I thought you were practicing for the Summer Olympic Javelin throw! Looks good.
stix Posted - 02/08/2018 : 00:47:28
Keep up the good work Jeff. I am really enjoying watching your progress.

Stix

Peregrin on Birk (Birk Comet RT with full fairing)
Lightning F-40 (built around R-84 frame)
Soma Smoothie Upright
LunaticFringe Posted - 02/05/2018 : 18:50:28
A big day today!

I hosed the bike down then built a storage area in the tail. I was going to build permanent storage behind the seat but found some panniers and luggage rack bag that will work great, meaning that I can ride around without the extra storage most of the time. I'll be able to clip in the panniers when I need to and be able to access from under the head fairing and seat access openings.

The storage box is made from a single layer of 1.5 oz mat with the corners reinforced with a layer of mat.



---



---



I cut the upper door spars off so that I can begin the process of making the doors. The video link shows how easy it is to hop in. Wahoo! I still fit! ;)

https://www.youtube.com/watch?v=0pt-VTJqkBs

---



---



---



The pic with the ruler is for study to show height that I need for the head fairing behind my aging noggin.



Jeff


www.recumbents.com © 2017 www.recumbents.com Go To Top Of Page
Snitz Forums 2000