7/14/03
Here are the custom cranks for the Cos2 being CNC machined at
Crossroads Machine.
In this
picture the cranks are half done. They will flip them over to finish them.
7/29/03
In this photo, the huge Cos2 chain ring is being machined by Pete
McAdams of Peterbuilt bikes.
3/2/04
The Cos2 cranks have been completed.
Thom says: "Both size and finish are top notch. Primary credit goes to Justin Clark of Crossroads Machine for the excellent contour
programming (on U.G. of course). I expect the huge 96 tooth chain
ring Pete made will bolt right on, and look awesome."
Here's a side
view of the new cranks, showing the very low Q.
Next step, making the rear suspension
More Soon!
Copyright 2003 Team Coslinger - All Rights
Reserved
